Desktop Poop Chute - No Supports Needed, Easy to Print
Description
Inspired by the Tik Tok from @pixelcadet my version of a support less desktop poop chute. INSTRUCTIONS TO PUT TOGETHER. All pieces can be printed without supports!! This model is designed and used to be attached to 3/4 inch wood. Other versions will be released in future to allow for other desk sizes. What do you need? 1.) Super Glue (I used Gorilla Glue) 2.) 6mm x 6mm x 2mm magnets (not required but recommend as it locks the bucket in place when sliding... also feels cool to lock it in) 3.) Double Sided Tape 4.) Designed for a desk/wood that is 3/4 inch wood. If you have a larger desk await future versions! Will release more soon. 5.) All 4 prints! Steps to make. 1.) 5% infill on all pieces, 2 walls, 0.2 layer height 2.) Glue together The Top Piece and Top Connector (Seen as Red and Green parts in pictures) Aligning the rectangle inlets together. Pieces should snap together, glue is used to secure each piece. 3.) Glue together the Bucket and Bucket Top Slider together. Another rectangle passage should help with alignment. Make sure you have the magnet side of the Bucket Top Slider is aligned with the Top Connector so magnets connect. 4.) OPTIONAL - glue magnets on each of the pieces. a.) 2 magnets on Top Piece b.) 2 magnets on Bucket c.) 1 Magnet on Bucket Top Slider d.) 1 Magnet on Top Connector 5.) Place double sided tape on the inside of the Top Connector piece ( seen as green in pics - refer to pictures in file for more help) 6.) Finally have a clean workspace. If you have any questions, please feel free to message me, i respond very quickly and am here to help :) Ryan & Astro
Statistics
Likes
0
Downloads
0