JessEm Compatible Ring Inserts for Router Lifts

Description

I needed to replace a couple of the [ring inserts](https://jessem.com/products/10-piece-insert-ring) on my [JessEm Mast-R-Lift router table](https://jessem.com/pages/router-lifts-plates), but I wanted to see if I could duplicate it instead of just buying one because, well. . . I can. So, I was able to successfully duplicate the insert plate, and then I made it parametric, so I just had to put in the diameter of the hole, and everything else was automatic. Then, I decided to put numbers on them to easily differentiate them. These plates work perfectly with the JessEm Mast-R-Lift I have, and the wrench fits without issue as well. The texture on the top surface is from the Prusa textured print bed surface, which I really like. Do not use supports. Prusaslicer complains, but they print just fine without supports. I have been using them for a couple of weeks without issue. I printed them in PLA and PETG. The PLA ones are more rigid, so that is what I ended up printing all of mine in. They were printed with 4 perimeters, 6 top and bottom layers, and 30% gyroid infill (what little infill there is). They are numbered from 1 to 10, and the number is the diameter of the hole, in 4ths of an inch. 1 = 1/4" 2 = 1/2" 3 = 3/4" . . . 9 = 2-1/4" 10 = 2-1/2" I also designed and printed a holder for them, since I wanted them to be mounted on my wall. I will be making a separate post with that design and will update this to link to it.

Statistics

Category

Tags