All in one PC using Raspberry Pi A and DF-Robot 7" DSI Touchscreen
Description
Need a tiny PC? Maybe for reading recipes in the kitchen, interfacing your 3D Print, or a console for your project? I love the Raspberry Pi 3 A. It's such a perfect form factor for small projects. And it fits so nicely in the middle of the [DFRobot 7" DSI Screen](https://www.dfrobot.com/product-2193.html). I designed this for a display for one of my projects. I don't use PIs as PCs often, but because my display was so close to a cute little iMac-ish-thing, I made a stand for anyone who wants one. You'll notice that the top, bottom, and sides are pinched in. After you put the bezel in, they will straighten out. I designed it this way to preload the bezel so the assembly felt super solid. Before I did this, the shell felt very flexible and flimsy. Note: You can put the power cable facing down, but you'll have the flip the display under raspi-config. The [model is on OnShape](https://cad.onshape.com/documents/21700aec93c1c8ed28a837a5/w/169ce13094f216073b915f6e/e/77c72cc857c23d596328bcde?renderMode=0&uiState=65753f39a07e9e689004ecb1).
Statistics
Likes
0
Downloads
0