PowerWheel Gearbox 6v, 12v, 24v
Description
I decided to model the gearbox and the gears, i couldnt find the complete gearbox here so i made it with tinkercad. It's for my daughter 6v atv modified to 24v 550 motor, tested for about 2 weeks and the gears are still holding. Material needed to build one from nothing. M3x30 screw (4x) 4x35mm steel pin (2x) Filament; PETG or stronger Grease Support needed for the first gear and drive gear, print everything flat except the drive gear i printed it in the air at 45deg I used a skirt for the first and middle gear and brim for the drive gear and the two half casing because my petg does warp a bit it's cheap. May the force be with you. Please dont sell my design, use it as you wish but dont sell it.
Statistics
Likes
0
Downloads
1