Lens Adapter Collar for Fuji GFX + Kipon Adapter
Description
I needed a lens collar for my GFX50s. A commercial product did not exist. So I made. This is only useful for Kipon's EF-GFX adapter. You can remix it to your liking. With the red nubbin on the adapter, the collar has stops for the 90˚ rotations on both sides, allowing 180˚ of rotation with the locking screw loosened a couple of turns. When fully clamped down, the camera will not rotate. Use an M3 16mm socket head hex screw, which can be screwed into the knob. A hex nut can be pushed in. You can make the hex hole smaller for a tighter fit, or just glue the nut into the hole. I would print this using a tough material like PA6/12-CF. Should be touch enough for normal use, but no guarantee of the safety of your camera. Use at your own risk.
Statistics
Likes
0
Downloads
0