Star of David Christmas Decoration - Holidays2023
Description
Star of David Christmas Ornament is a 5 point star in 3d The curve and the transparency give a blown glass look. Add making and elegant and classic look to your decorating. It is designed to be printed on a resin style printer or an FDM printer. Both models are provided. The one displayed in the photographs was printed on an Anycubic Photon with clear resin. then washed with acetone and coated with a uv-resistant clear. The ornament is printed in 12 sections and the glued together. Resin Print 2 - Star of David (RESIN)-01 10 - Star of David (RESIN)-02 The parts are sized so 2 full ornaments can be printed at one time on a Anycubic Photon. They are also pre-hollowed out to give the correct strength while optimizing for resin use. See pictures for Assembly Instructions: 3D PRINTING SETTINGS FDM Print: When we print these with an FDM printer we use a clear or transparent filament and print it at its upper temp range. Print in spiral vase mode. a .4 nozzel works but a .8 is better. Print 12 Star of David (FDM) models and glue the together. Resin Print: Each resin is different. So use the recommended settings for the resin you have. On part 1 - Add supports to the corners of the tabs. On part 2 - Add tree supports to the points of the pentagon.. See picture for more detail. The picture was clear resin, .05 layer Hight, with an acetone wash, and a UV resistant clear coat. Place supports on the model so that resin can flow out of the model if the build plate is upside down. See the photos for the exact position. Coat the model with a UV resistant clear coating. The inside of each part was coated prior to assembly. Then when the entire thing was finished the outside was coated.
Statistics
Likes
0
Downloads
0