TKey-G1: Keyboard dock / Kickstand for Toughpad FZ-G1
Description
This is a stand + keyboard base I designed for the Panasonic Toughpad FZ-G1.It can be easily assembled and disassembled using two M4 screws. It's compatible with a thick battery. You can also use it as a desktop stand without installing the keyboard. (Due to the G1's heavy body and the lightweight keyboard, the final installed form resembles a Surface.) ### About the Bluetooth keyboard: I purchased this unbranded keyboard, quite inexpensive, for about US$10. You might find a similar one on AliExpress or Taobao.com. The seller's description: 9-inch/8.9-inch black with touch, dimensions 230x150x6mm. ### The hardware needed is as follows: #### For Step 1: 2 x M3x10mm screws 2 x M3 nuts #### For Step 2 (used to install the keyboard holder): 16 x M3x5mm screws 16 x M3 nuts #### For Step 2 (used for hinge installation): 2 x M3x20mm screws 2 x M3 nuts #### For Step 4 (used to connect base and plug): 2 x M4 screws 2 x M4 nuts.
Statistics
Likes
0
Downloads
0