Strix Nano Goblin DJI O3 / Vista mount
Description
I remixed a few mounting options for DJI O3 and Vista in combination with the flight controller Matek 405WMN and 405WSE. The O3 mounting solution allows tilting the O3 to get access to the SD card. In the hinge is a long M2 screw. Maybe even a piece of filament works good enough. You also require longer 1.6mm screws (1.6x10mm) to replace the original O3 case screws. I also recommend, putting some silicon rings between the O3 and the printed part. For both VTX so far back, the 20cm coax replacement cable is needed!
Statistics
Likes
0
Downloads
0