Night Light 3-way Lithopane Cover
Description
The panel slots for the lithopanes are 70 x 120 x 2.6mm. I cropped my pictures to 0.6:1 aspect ratio in GIMP. <br/> By default cura is set for 2.5mm height on top of a 0.4mm base. The height must be changed to 2.0 for it to fit properly. I have not tried other lithopane generators. <br/> I used a dimmable 100 lumen nightlight, It did turn off with ambient light until I added the top cover. It's a little bit fiddly to put together. It's almost easiest to put it all together, and put your fingers in holes in the bottom to push the nightlight into the outlet. <br/> The hole above the outlet slots is for the outlet cover screw to secure the holder. it's only needed if your outlet is too loose and the weight of the holder keeps pulling out the nightlight. <br/> If you put the nightlight in upside down, you can adjust the dim slider through the bottom holes without having to remove it from the outlet.
Statistics
Likes
0
Downloads
1