Pine Cone Christmas Decoration 1
Description
This Christmas Tree Decoration is one of 4 designs based on pine cones and walnuts. These are produced from real pine cones and walnuts I found in our yard. I think neighbour is feeding the squirrels walnuts as we don't have any walnut trees in the area. The pine cone is based on my 3D photo capture of a real pine cone. The 3D photo scanned model can be found on SketchFab at: https://skfb.ly/ovwPW In the 3D capture process, 50 photos of the pine cone from all angles are analyzed and assembled into the 3D model using a program called PhotoCatch on a MAC computer. The 3D model was then manipulated in Blender 4 to produce the STL file included here. In this stage, the pine cone was split down the centre in halves for printing flat to avoid having to print supports. A hole was added to the back of the 2 halves for ease of alignment when gluing. In Cura 5.3 I scaled the .stl to approx 82mm and printed on an Ender 3 printer with pla filament Print settings were Ender 3 printer Bed temp 60 Filament temp 200 Speed 60mm No supports Post printing, a small wooden peg was fitted in the alignment hole and the 2 halves were glued together with two-part, 5 minute epoxy. An elastic band held the pieces together while the glue set. The pine cone was then sprayed with a coat of Rustoleum brand primer, and then Rustoluem brand silver for colour. I recommend printing them in the colour of your choice to avoid the painting. Lastly, a ribbon is added for hanging it on a tree and your decoration is complete.
Statistics
Likes
0
Downloads
0