Drill Press Tool Caddy-- 80mm
Description
This tool caddy has space for a chuck key, a few commonly used tools (center drills, a countersink, etc) and two small bottles of cutting oil. I intentionally sloped the top so I am not tempted to leave drills stacked on top of it! I also added holes in the bottom of most of the pockets to prevent them from accumulating swarf. There are two optional toe clamps that hold the caddy against the rack gear retainer -- with these in place, and the assembly screws loosened slightly, the caddy will follow the table as it is rotated. They can also be omitted and the caddy can be placed above the rack retention collar for it to remain in position regardless of where the table is. To assemble, you will need: 2x M6x50 socket head cap screws [2x M6x60 socket head cap screws for toe clamps] 2x M6 washers [+2 for toe clamps] 2x M6 nuts [+2 for toe clamps}
Statistics
Likes
0
Downloads
4