Anti rotation parts for WLToys 12428
Description
These are antirotation pieces for the PLA snow tracks and a WLToys 12428. The rear axle piece slides over the axle and slots into where the sway bars are. I have been testing it for a while with PLA+, but regular PLA might be too brittle for this. The front part was designed with the original plastic pieces from the car, which just happen to fit the metal upgrades, so it should be fine with maybe a little play. The front ones are a tight fit. Print the front twice, those go on the treads from the original model. Print the Tube 2x and slide that over your axle. It has a line in it to allow a little play, but you could zip tie it if you want it to be a little stronger (I didn't, so not pictured but that was the original idea. Print 2x rear anti rotation, those go on the back treads of the original model. I recommend the print settings in the original file, as you want these to be beefy. I also recommend PLA+
Statistics
Likes
0
Downloads
1