Sovol sv06 Spindle nut adapter
Description
Because I couldn't find a suitable replacement spindle nut, I built this simple adapter. So I can install standard nuts. (TR8 x 4, with two thread starts) You only have to drill out two of the holes to 5mm if you get the standard one with a 16mm bolt circle, otherwise the screws won't align (Sovol bolt circle 17.5mm). Here is a link with the spindle nuts I use: https://princore.de/products/trapezmutter?variant=39254414032995 what else is needed: 4 washers M3 4 M3 x 16mm screws
Statistics
Likes
0
Downloads
1