Plissee Holder - more stable
Description
For the holder, an M3 12mm countersunk screw and a corresponding M3 nut are required. Press the nut into the holder, pull the threads through the channels and screw the thread holder tight. The threads are held so tightly that no further knotting or similar is necessary. The CAD model is created in onshape and can be viewed and copied at the following link. This allows the length of the holder or similar to be changed: https://cad.onshape.com/documents/1258ae9057c652d15997fb0b/w/63f3fc1cd3fcb924e5cf2174/e/0fd0f6c51322c1b377884904?renderMode=0&uiState=65816fbaad8d897eca6a8f42
Statistics
Likes
0
Downloads
0