LED Party Block Module for ESP8266
Description
This is a module for housing an ESP board, 18650 battery, and addressable LEDs. It is printed with transparent PETG at 250C. - The initial layer should be as thin as possible, since light will be flowing through it. - 18650 terminals are available on [Amazon.](https://www.amazon.com/s?k=18650+terminals) - I used hot glue to attach everything. - The insert should fit firmly into its footprint in the bottom of the box. The slide-on lid should also be snug. It it is too tight, sand the edges edges down slightly. - The insert will not fit into the box if the WeMos is mounted too low. See the placement of the module in attached photos for reference. - The 'fixture' provides a flat surface to mount stick-on WS2812B to. I have been having fun setting up light displays that I can control over long distances using the [FDRS protocol](https://github.com/timmbogner/Farm-Data-Relay-System). FDRS is a system I developed to simplify and organize ESP-NOW and LoRa data collection. Since FDRS allows you to use any ESP device as a simple repeater, you could theoretically set up synchronized light displays that span very long distances.
Statistics
Likes
0
Downloads
0