Fettec Drift Car BIG (2207 / 2306)
Description
Video of the car in action: https://www.youtube.com/watch?v=JWCcLZzG5E0 Summary This is a remix of the FETtec Drift Car. The original Body didn't fit my electronics and doesnt fit an DJI AirUnit, so I made a much larger one. I used the following print settings: Chassis: TPU (Sainsmart Shore 95A) 100% infill 0.16mm layer height Shell: PLA (Bavafil Black PLA) 3 walls 40% infill 0.16mm layer height Wheels: TPU (Sainsmart 95A again) 1 wall 5 bottom/top layers 0.12mm layer height 0% infill (wheels need to be soft for some grip) Bumpers: TPU (Sainsmart 95A...) 3 walls 8 bottom/top layers 0.16mm layer height infill doesn't really matter, it will be solid anyways No Supports needed for any of the parts. More info on the drifter car here https://www.thingiverse.com/thing:4685352 My smaller (but still 20% wider than original) version: https://www.thingiverse.com/thing:4692952 Manual here: https://fettec.net/media/pdf/fd/c8/32/FETtec-Drift-Car-Manual.pdf The car is extremely fun, can't get enough drifting action :D Additional material needed: Fettec 15A AIO (https://fettec.net/shop/fettec-mini-aio-15a?c=9) 2306 or 2207 motors with low kv (the lower the better) Receiver of your choice (for example FrSky XSR) 5V Step-Up (for Receiver) 12V Step-Up (for Air Unit) Any 1S battery (18650 3000mAh are ideal, I am using these: https://www.akkuteile.de/lithium-ionen-akkus/18650/samsung/samsung-inr-18650-30q-3-6v-3-7v-3000mah-15a_100805_1325) M2 screws of various lengths Some cables and XT30 plugs
Statistics
Likes
0
Downloads
0