Ofna/Jammin/Hong Nor Rear Body Mount Lowering Shim X1/X2
Description
Rear body mount adapter/spacer for a variety of Ofna/Jammin/Hong Nor buggies/truggies (X1/X2). Bodies that fit the X1/X2 series buggies are becoming increasingly difficult to find for brushless configurations with the introduction of the Associated RC8B4 (the RC10B3e bodies fit the chassis very well) as the nitro bodies tend to sit lower on the chassis. The Agama bodies can work, but the rear of the body sits pretty low with respect to the rear body mount. Similarly, traditional cab-forward truggy bodies tend to sit too high in the rear in the CRT platforms as well. You can drill an additional hole in the tower or you can use this spacer to shift the mount lower (5 mm). This maintains the anti-rotation feature of the original body mount while also shifting it lower. It will shift the mount forward by 2.2 mm. Pretty simple part - there should be no post processing required unless your holes come out slightly smaller (in which case, drill the holes out with a 3 mm bit).
Statistics
Likes
0
Downloads
0