Paint Spinner
Description
This is my designed paint spinner. I used 5 skate bearings for the wheels inside the bottom. This is modular. I have one printed 3 units tall and one that is 4 units tall. 5 would likely still be sturdy. Per rack you need: 1 Bottom, 1 Pillar Base, 5 Wheel Pegs, 1 Wheel Plate, and 1 Pillar Cap. Per rack level you need: 1 Pillar and your choice of Paint Disks. The Small Bottle Paint Disk can store big bottles about every 3rd bottle with small in between. The Wheel Pegs I print standing on end. The Pillar and Pillar Base I flip upside down and print with supports set to "Touching Buildplate." The Pillar Cap I print with supports set to "Touching Buildplate." The rest shouldn't need support or any rotation.
Statistics
Likes
0
Downloads
0