RC, FPV Land Rover Series 3 Lightweight (9g servo driven)
Description
RC model Land Rover series III military half-ton (lightweight) I made this because I was bored and my real one of these is broken It uses 9g servos: It is driven by a modified 9g servo. The servo is modified to spin continuously rather than just 90 degrees. To do this you have to take the servo apart and either glue the potentiometer in place or replace it with two resistors. There is a good video online where flitetest do this: https://www.youtube.com/watch?v=KAOVefTCu3M&t=1s I made the entire thing out of PLA and stuck most of it together with super glue. Each front wheel uses 2 7*11*4mm bearings to prevent friction. It's worth buying a nice assortment of m2,m3 and m4 bolts off amazon if you intend on making this, redesigning this or making anthing similar to this as its all very useful! I have also left a small bit of space where the right seat would be for a third servo, this is so an fpv camera can be mounted upon the servo and you can look around while you're driving around the house from the comfort of your bedroom! I have uploaded step files, I think those are the ones you can edit... Pls feel free to fix or edit anything.
Statistics
Likes
0
Downloads
1