Drilling template for European cylinder
Description
This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is more difficult to explain than to do. Anyway: - insert the TEMPLATE from the inside of the door and drill, always from the inside, through the hole in the TEMPLATE (5mm); - from the external side, drill with the hole saw using the hole you just made as the center (the wood and then, if there is one, the sheet metal); - remove the TEMPLATE and insert the cylinder. That's all! Cost: 10 minutes of time for taking measurements, planning and drawing and only 20 cents for PLA, compared to at least €10 on ebay... I hope this simple "tool" is useful to you. **Good print!** If you found it useful, and if you like, you can offer me a [coffee!](https://www.paypal.me/thorlab), it will be an extra motivation to continue designing.
Statistics
Likes
0
Downloads
1