Earthing, TENS, ESD, EMG, EKG Sensors Electrode Patches with diam 2 mm holes
Description
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ Please Respect The License And Give Credit To The Designer ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾ Why Buy Conductive Rubber Pads When I Can Print Them Myself Using My Conductive And Flexible Pi-Etpu 95-250 Carbon Black Filament... Could Perhaps Be Used For: ¤Earthing, See More Below ¤Transcutaneous Electrical Nerve Stimulation [Tens] ¤Esd-Protection (1 Mohm To Ground Is Used In The Industry) ¤Biometrics, Bioelectronics ¤Ecg/Ekg Electrode Patches ¤Surface Emg Sensors Made These So That The 1.75Mm Pi-Etpu 95-250 Carbon Black Filament Could Be Used As Wire (9-10M Is Aprox 1Mohm), Solder Iron Or Lighter To Melt Them Together... Stretch The Filament Until It Snaps And It Will Be Easy To Insert. Also 2Mm Connectors Are Commonly Used I Think... Could Be Used As Is Under Some Elastic Bands Etc Or Together With Electrode Gel, Also Tac Gel (Electrically Conductive Adhesive) Could Perhaps Be Used. Some Of Them Can Use 1.75Mm 3Dp Filamament Or Other Flexible Strings To Strap It In Place. I Made These Designs Back In 2015 (But Forgot To Publish:-( To Put Some Light On Earthing/Grounding, That Will Hopefully Support Great Health. But The Best Is Obviously To Go Outside And Enjoy Mother Earth Without Shoes! My Big Interest For Health And Well-Being Led Me To, Among Other Things Of Course, To The Concept Of Grounding/Earthing. The Research Available Strongly Indicate That Its Very Good For The Body To Be In Contact With The Ground, To Get Natural Antioxidants That Help The Body To Heal Faster. Go Here To Find Out More (I´M Not Affiliated With Any Of Them) Https://Earthinginstitute.Net/Research/ Https://Www.Earthingpeople.Se/Forskning-Om-Jordning/ Make Sure You Watch The Videos If You Do Not Like To Dig Into The Hardcore Research. ¤For Earthing Use A Wire To The Actual Ground Outdoors! Your Electrical Grid Is Likely Full Of "Dirty Electricity" So Its Not Recommended To Use The Socket For This Purpose. But The Best Is Obviously To Go Outside And Enjoy Mother Earth Without Shoes! You Are Free To 3D-Print And Sell These Without Other Permissions. You Can Buy My Filament Here Https://Www.Creativetools.Se/Palmiga Find Tips On How To Tie Ribbon Sandals: Https://Www.Google.Se/Webhp?Sourceid=Chrome-Instant&Ion=1&Espv=2&Ie=Utf-8#Q=How+To+Tie+Ribbon+Sandals The Information Here Is For Educational And Entertainment Purposes Only. It Is Not To Be Considered Medical Advice, Prescriptive Or Diagnostic. See Your Physician For Qualified Health Care. I Do Not Claim That These Designs Will Work In Any Special Way Or That It Is Safe To Use. Make Sure The Ground And Neutral Are Not Mixed Up In Your Wall Socket, Do Not Risk Anything, Consult Your Electrician! You Use My Designs On Your Own Risk And I Am In No Way Responsible For Any Damages Or Injuries. Please Check Out My Unique Uv-Stable, Flexible And Conductive Filament Called Etpu 95-250 Carbon Black Filament That Was Used To 3D Print This Part. Don´T Need The Conductivity? Well The Conductivity Is Great For Some Things But Perhaps Not Your First Choice? Then Consider This: This Filament Will Give You Some Really Nice Benefits If The Conductivity Is Not An Disadvantage For Your 3D Printed Design: •The Material Composition Eliminates “Stringing / Webbing” Issues. •The Hardness Of 95 Shore A And The Carbon Black Filler Makes For Great Print Abilities. •The Carbon Black Filler Is An Excellent Uv Stabilizer Thus The Prints Are Built To Last In Very Harsh Environments. •The Matte Black Surface Finish Has A Very Exclusive Look. •The Material Feels Very Nice And Dry To Touch. •It´S Not Too Stretchy And Will Do Great For Timing Belts Etc. Http://Rubber3Dprinting.Com/ Https://Youtu.Be/Dwwoe9Ibqq8 Https://Youtu.Be/Icziz5Uuooe Https://Youtu.Be/44Ddtr0Xdvu Https://Youtu.Be/Gor8Chgflp4
Statistics
Likes
3
Downloads
0