3.5 inch SATA NAS (Raspberry pi)
Description
### 3 x 3.5'' SATA HDD NAS using Raspberry Pi This NAS case is a _3-bay_ of 3.5'' SATA HDD. I made this project to repurpose a few old PCs I had laying around. So it was build with mostly salvaged parts. It is using Raspberry Pi 4, but other RPI models can be used as well. The drives are _hot swappable_, and can be fulled out from the case through the door. The screen allows you to monitor temperature, and resource usage (RAM, CPU, disk). It can be turned on/off using a switch at the back of the case. Can be connected to WIFI or directly to LAN. **Required Parts**- - Raspberry Pi 4 (or other) - PSU with 12v and 5v output (from an old PC) - 12V Fan (from an old PC) - 3 x SATA to USB adapters - 3 x 3.5'' SATA HDD - 3M and 4M screws - I2C screen display - basic LED Each part is printed separately and then everything is assembled. So the prints are pretty easy and doesn't require any special settings. The walls should be printed laying on the bed, and the top/bottom should be printed laying upside down. In the future I will add a video on how to assemble it and how it was built. If needed, I can supply the Fusion360 CAD files :)
Statistics
Likes
0
Downloads
0