Diatone Blade 150 7.5° FPV Camera mount
Description
Bracket To Hold 600Tvl Camera With Microphone From Banggood To A Diatone Blade 150/180/200 Frame With 7.5° Tilt (Must Have The M2 / 3.5Mm O/D Standoffs In The Two Front Most Holes) Http://Www.Banggood.Com/600Tvl-8_0Mp-14-2_8Mm-Cmos-Fpv-170-Degree-Wide-Anlge-Lens-Camera-Palntsc-P-984345.Html?P=Yw18051095305201501X Update: Found Mine Was 0.5Mm To Short But Could Be Printer Settings. Also Added Back Cover And Plain Case. Print Details: Printer: Rigidbot Material: Abs Slicer: Slic3R Layer Height: 0.1Mm (0.3Mm First Layer) Raft: No Infill: 15% Support: 15% Off Vertical Time To Print: 1Hr 15Mins Finish: Only Removed Support With Knife
Statistics
Likes
13
Downloads
0