Intermediate switch for C13 and C14 connection
Description
#### Intermediate switch for/between C13 and C14 connector ---- On-off switch that can be connected between a C13 and C14 connection. For the C13 or C14 connection, the standard mounting sockets were used, which were fastened with an M3 screw and a self-locking nut. A rocker switch (type KCD2-201N) was used as the switch - here is an example [link on Amazon](https://www.amazon.de/APIELE-Kippschalter-LED-Schalter-Wippschalter-Industrie/dp/B08SJ2KTX2/ref=pd_bxgy_d_sccl_1/258-5723036-5630166?pd_rd_w=RtSH4&content-id=amzn1.sym.1fd66f59-86e9-493d-ae93-3b66d16d3ee0&pf_rd_p=1fd66f59-86e9-493d-ae93-3b66d16d3ee0&pf_rd_r=A2XTHMDYAJWEAQ5R23B4&pd_rd_wg=WO87s&pd_rd_r=592daafd-e9e2-41dc-880a-3a467432b7ef&pd_rd_i=B08SJ6JV4Q&th=1). for this. I also decided to use this switch because it has two poles, i.e. both live wires are always switched off. In addition, the light indicates if it has been switched on (very practical from a distance). The lid was fastened with M2.5 screws. Only the holes were provided in the case for this and NOT a thread. --- **HINT THREADS** I recommend "re-drilling" the holes with a 2 mm drill and then cutting the M2.5 thread. However, an M3 thread can also be used. --- **HINT WIRING** I soldered all the connections accordingly and isolated them with heat-shrink tubing. The decision to solder was made because this connection does not "build up" as much as a cable lug, for example. However, a different type of connection can be chosen. ## #### Printing parameter ---- - Material: PLA - Weight: Case - 46g / Lid - 9g - Filament: Case - 15,6m / Lid - 2,9m - Extruder temperature: 200°C - Bed temperature: 60°C
Statistics
Likes
0
Downloads
0