Aimpoint COMPC3 elevation and windage turret CAP
Description
This is a replacement for the Aimpoint COMPC3 turret cap, my model is pre-2014. I don't know if it fits the newer models. I didn't find any details about the thread and the pitch online, so I had to measure it by myself and draw it. I used OrcaSlicer, printed on a ELEGOO Neptune 4 Pro. Printing Details: Material: PLA+ Layer Height: 0.15mm X-Y hole compensation: 0.1mm Infill: 15%
Statistics
Likes
0
Downloads
0