Amiga 1200 Backdoor Extender kit 4 functions
Description
This is a remix of Amiga 1200 Back Door for HDMI and Micro SD Card Extender but with added USB and Tactile switch (for reset button or RGB2HDMI control etc). There are 6 variants + a Tactile blanker if not needed. The variant is about with or without brim and the shape for the lower HDMI connector. I am using Variant #1 (and tested #2), the others are optional for you if needed. Pay attention to the McroSD Card to make it fit properly inside (and test the memory card) before gluing with some superglue underneath the extender. The MicroSD card might be a bit stuck in the start but should loosen up when used a bit. Its quite crowded inside so be prepeared to cut a bit on the plugs for a tight fit. I have used machine screws on the USB connector and some small wood screws for the HDMI. For the bottom screw I use a PC powersupply screw, or you can cut a larger wood screw. Solder wired in on the Tactile switch before snapping it in place.
Statistics
Likes
0
Downloads
0