COVERED LOADING DOCK HO SCALE
Description
This COVERED LOADIING DOCK with DEPOT attached is in HO (1/87th) scale. The covered support structure of the model needs to be printed multiple times for the overall length that you want for your layout. This model scales very well to N gauge (54% in XYZ) if your printer is using a .25mm nozzle. I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished. If you would like me to design a custom model for you contact me directly at: garylavart@yahoo.com. It is totally free but I will post it on Thingiverse for others to print and enjoy. Happy modeling, Gary Lavarack - 3Designer
Statistics
Likes
0
Downloads
1