Olympus Pen, Pen S leatherette
Description
print in tpu with 1 wall line, 100% infill, slow and at 240-250 degrees C. print on pei plate for the texture and dont forget to have it printed mirrored so the right side is facing outwards. after printing, wrap around the camera and mark with a pencil the points that are going to bend. use a heatgun to warm up (be careful not to melt it) and bend with your hands to the shape of the camera. afterwards use contact glue on the leatherette and only on the areas where it might lift on the camera body. glue together and voila. Good luck! for those viewing the solidworks files. The dimensions are not symmetrical I know, but trust me thats the case on the camera.
Statistics
Likes
0
Downloads
0