RTI ramp (flex ramp)
Description
1/18 Rti (Ramp Travel Index) or flex ramp for RC crawlers. Requires 8x M2 screws to assemble I sanded my driving surface to make sure my tyres can grip it Measure from the hub down to the ramp surface. My Stock Trx4-m made 35mm from the ground to the ramps driving surface. 22.5° angle from the ground 215mm long 85mm tall at the end The sides should match up with the ramp surface and they should sit 90° from the surface they sit on. The little cylinder is to go in the bottom corner to stabilise the sides.
Statistics
Likes
0
Downloads
0