fish feeder
Description
I made this fish feeder because I was going on A holiday. and I needed to feed my 160 liter tank with about 80 small fish. I feed powdered flakes. The distance between the hopper and the rotating ball is adjustable. don't be greedy on the infill. for electronics I used A basic 28BYJ-48 stepper motor, A corresponding stepper motor driver, A arduino uno, and A 9V 1a dc power supply. Note: a 9V 1.5a or 2a will also work. After assembling it myself I made some adjustments. btw I glued the motor in place bc I didn't want to bother with bolts and nuts. I'd like to see your makes and remixes. (NOTE: ask GPT to correct this code bc thingiverse's text editor interferes) the code i put uploaded to my arduino is: ''''#include Stepper // Define the number of steps per revolution const int stepsPerRevolution = 200; // Define the stepper motor interface Stepper myStepper(stepsPerRevolution, 8, 9, 10, 11); void setup() { // Set the speed of the stepper motor myStepper.setSpeed(100); Serial.begin(9600); } void loop() { Serial.println("Moving"); // Move the stepper motor 7500 steps. ↓here↓ you can chenge how much food you give↓ for (int i = 0; i < 7500; i++) { myStepper.step(1); delay(2); // Adjust delay as needed } // Wait for 24h in milli seconds before the next set of steps delay(86400000); // 24h }""''
Statistics
Likes
0
Downloads
0