Yuneec Q500 External Camera Cable Mounting Bracket
Description
This Is A Bracket To Mount The External Antenna Wire After The Cgo2 Has Been Modified With A 30 Cm Ufl To Rp-Sma Antenna Wire This Wire Will Come From The Camera To The Rear Of The Yuneec Q500 Drone. How To Install: This Bracket Should Be Epoxied To The Bottom Of Your Q500 And Also Has A Optional Pilot Hole To Add A Screw For An Additional Way To Secure The Bracket To Your Q500. Printed In Abs At 80% Infill. Additional Hardware Needed: 1 X Tube Plastic Epoxy 1 X 30 Cm Ufl To Rp-Sma Antenna Adapter Cable 1 X 2.4 Ghz Cloverleaf Polarized Antenna 1 X #8 1/2" Screw (Optional)
Statistics
Likes
20
Downloads
0