Bidet Toilet Sprayer Holder, Wall Mount
Description
I designed a simple bidet sprayer holder that could be affixed to the wall within easy reach. For easier printing, the STL file has both parts already laid out (some assembly required). No supports or adhesion options should be needed. You'll need a few things to assemble and mount this holder: 2x large command adhesive strips 2x M3 5mm threaded heat set inserts 2x M3 8mm bolts Assembly: 1. Use a soldering iron set to 214 degrees celsius to slowly press the threaded inserts into the 2 holes on the back of the holder piece. 2. Thread the 2 bolts through the back of the flat backplate, so the head of the bolts are sunken into the bore and flush with the back surface. Tighten the 2 parts together until they are snug. 3. Apply the 2 Command adhesive strips to the back of the flat backplate so the pull tabs are still accessible, in case you want to remove the holder later. 4. Find a position for the holder that works for you, and press it to the wall where you would like to mount it. You should probably let the adhesive settle in for an hour before hanging your bidet sprayer on it. Estimated print time for a sonic pad using the fast PLA preset is 24 minutes.
Statistics
Likes
0
Downloads
1