AD584 Another box with Li-rechargable
Description
Here is a box for anther form factor voltage reference AD584, that you can buy on Aliexpress. It is quite nice tool. - I added slot for Li-Ion battery (I used Cellevia 3.7V/800mAh p/n LP453350) - I added function for missing power switch. Here I use switch TSM102, or you can use any with 6mm hole and which is not so depth. - Between battery tray and between AD584 board, there is little orifice for battery cable (left right corner). - On the bottom is square hole for molex connectow which you can additionaly solder. Please excuse I did small mistake in design. The mount holes for AD584 not 100% fit to M3 holes in bottom part. You can use only two M3, or rather use 4x M2.5 that fits. Use large M2.5 washers from bottom and ...then fixed well :-).
Statistics
Likes
0
Downloads
0