Yarn Holder / Woll-Halter (drehbar)
Description
I printed the yarn holder by Toni_Ravioli_ for my MIL. Thanks for the design. https://www.thingiverse.com/thing:2667872 Unfortunately, the top part, where the pole begins, broke fast. My Changes: I gave the problematic part a curve and made the bottom part smaller for faster print time. I enlarged the point of the bottom part to about 8mm. Also, i bought washers with an inner diameter of 22mm. I had to enlarge that part aswell. -> You still need the same bearing (8mm/22mm). I used five washers with 22mm inner diameter.
Statistics
Likes
0
Downloads
0