MMDVM Duplex Hat RaspberryPi3 Snap Case
Description
This case is for use with the Raspberry Pi3b and MMDVM_HS_HAT_DUPLEX v1.47 with the .96" display and the new style antennas. This Hat is the one I used: [MMDVM Duplex Hat](https://www.amazon.com/GOOZEEZOO-Hotspot-Display-Support-Raspberry/dp/B0BP69NSR6) I originally printed the case remixed by [@wtxdxer](https://www.thingiverse.com/wtxdxer/designs) however it didn't quite fit my display location or the new slim antennas. I also applied a hex grid pattern instead of the slits to hopefully release more heat. The new hat may also be slightly higher as I had to modify [@fred909](https://www.thingiverse.com/fred909/designs)'s standoff ever so slightly to get the hat to fit level with the Pi3 Board. Also took the time to inset the screen with some beveled edges. The snap fit case works really well and is tight. I find it easiest to separate by pushing in at the LAN corner of the top and then starting the separation. Future To Do: <ul> <li>Pry point to separate case halves</li> <li>Vertical Dock</li> <li>Adjust Antenna Holes (Slightly off)</li> <li>Remix an ultra slim case</li> <li>Inset fan (somehow)</li> <li>Find time to do the above</li> </ul>
Statistics
Likes
0
Downloads
0