Creality Sprite ribbon management v2
Description
In the 2nd version: 1. Fixing the ribbon with clips. 2. The ribbon no longer extends beyond the printer's dimensions. 3. Universal brackets, suitable for Ender 3 | S1 | Aquila, other similar. 4. Added clip for fixing other X-cables on the ribbon. 5. Added reverse of the clip for attaching the tape to a 40mm profile. Tips: 1. It is best to print with PETG. It is flexible, sinteres well, and allow screws self-tapping. ABS won't work. 2. The bracket on the head is installed in place of the standard one. 3. It is better first snap on the ribbon the middle bracket, and then screw it on. The simplest option is to make 2.7 mm holes (in the pulley cover X) and screw M3х6 into. If you don’t have a 2.7 drill, then drill 3 mm and secure it with nuts on the back side. 4. The first option of the bottom bracket is mounted on an M3x20 through screw and a T-nut. The second option is for Ender 3 S1, because it's profile closed on the side.
Statistics
Likes
0
Downloads
0