Inception Designs Stella compatible barrel fronts
Description
Stella ported front - goes on the front of your Inception Designs barrel back. The first version has full sized porting throughout, the V2 has progressively larger porting. My "ear" gauge tells me the V2 is a touch quieter. I also think it looks better. Stella noot front - goes on the front of your Inception Designs barrel back. IT IS LOUD. Stella can - threads onto a Stella back, to be printed with the can core. This is cosmetic, if you have high hopes of things getting quieter, save your filament. Make sure if you print with supports that there are NO SUPPORTS in the threads. Trust me when I say it will be a headache. Stella can core - threads into the can which threads onto your barrel back. It will hold the insert in place if you are using an XL insert back. DO NOT PRINT SUPPORTS IN THE THREADS. *Post printing clean-up* I used a power drill with steel wool to clean up the inside of the barrels. It's a bit archaic, but I wrapped the steel wool around a pencil and polished until the inside was shiny.
Statistics
Likes
0
Downloads
1