Rocket Nozzle - Fits inside 1.25in PVC pipe
Description
This is a super simple rocket nozzle created with a 90 degree convergence angle and a 30 degree divergence angle made to fit 1.25in PVC pipe. The throat diameter is 6.6mm while the nozzle diameter is around 26.5mm, for an expansion ratio of 16. Recommend printing with 100% infill due to instantly melting upon ignition, and running a test partial print (or several) to dial in the scaling as your printer may vary. Full disclosure I have not tested this, and have no idea if it will work. Enjoy!
Statistics
Likes
0
Downloads
1