1/18th Scale Working RC Tank
Description
This RC Tank is designed to be around the 1/18 scale mark. It weighs in at just over 10 pounds and has high torque from the 2, 29T 550 Motors inside also making it highly maneuverable. This model comes with visual model animations on assembly and instructions and information on exactly what you need to complete this tank. Materials Needed -(240) M3x14mm Screws -(8) M5x15mm Screws (Screw Head Height Under 3mm) -(32) M3x8mm Screws -(12) M3X10mm Screws -(22) 5mm ID x 10mm OD x 4mm Length Bearings -(1-1/2) Spools of Filiment -(4) M5 Nyloc Nuts. -(2) M3x4mm Set Screws/Grub Screws. -(8) 10mm Diameter Magnets (Optional For Body Top) -550mm of 5mm Stainless Steel Rod. -130mm of 5mm Stainless Steel Threaded Rod. -(2) 550 29T Motors (You can use 35T For Higher Torque but Less Top Speed) -(2) Traxxas XL-5 ESC's (You can use whatever Brushed ESC. I just had the best luck with Traxxas) -(1) Flysky FSI6 Reciver and Transmiter. (You can use any transmitter and reciver you want just make sure you can mix channels) -(1) 2S Lipo 5000mAh Tools -Grinder / Dremel -Grinder With Cutoff Wheel (Or Something to Cut Stainless Steel Rods) -Bench Vice / Hammer -Soldering Iron for Electronics -3D Printer with Build Volume of at least 250mmx300mm Link to Video on Instagram: https://www.instagram.com/p/C12TKtzLvv7/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== YouTube Channel: (Video on the Tank is in the making) https://www.youtube.com/@RadioFlyer05/videos
Statistics
Likes
0
Downloads
4