2up V2 Bearing Plate
Description
This Replaces The Wood Bearing Mount On The Qubd 2Up V2 Printer. You Will Need 4 Of These To Replaces All Plates. This Plate Has Groves On The Ends So You Can Really Tighten Down To Secure The Bearing To The Frame And Avoid Friction And Binding On The Shafts. You Will Need To Drill The 4-M3 Holes. Just Match The Holes From The Old Wooden Mounts. I Find These Plates Take Away The X Gantry Sag And The Y Axis Wobble.
Statistics
Likes
6
Downloads
0