Parametric sprinkle nozzle for watering can
Description
In Case You Lost Or Broke The Sprinkle Nozzle For Your Watering Can, Or Want A Different Spray Pattern, Look No Further. The Holes Are "Drilled" In A Slant Fashion, Helping To Get A Nice Spray Pattern. The Default Neck Diameter Is 25Mm, Slightly Coned, But You Can Change This. The Form Of The Main Cone Is Controlled By Cone_Dia (Cone Diameter Assuming No Bevel) And Cone_Len (Cone Length, Or Height If You Wish), But Also By Cone_Bevel, Which Controls The Size Of The Beveled Part Along The Circumference. Do Not Make The Cone_Len Too Small Compared To Cone_Dia, Or You Will Have Problems Building The Resulting Flat Angle Properly. Parameter Wall Is The General Wall Thickness. A Thinner Wall Means Shorter Print Time, But Do Not Make It Too Flimsy. The Spray Pattern Is Controlled By The Parameters Nozzle_Dia (Size Of Each Opening) And Nozzle_Dist (Distance Between Openings). Reduce Nozzle_Dia And Nozzle_Dist To Get A Softer Spray.
Statistics
Likes
288
Downloads
0