ArcLight Pistol - Star Citizen
Description
### Info This is my take on Star Citizen's ArcLight Energy Pistol. I got the file from the game files and put a lot of effort in making it viable to use in 3D printing. There is a tutorial somewhere how to do it, but if you have questions just send me a message (preferable on reddit see down below) ### Putting it together I designed a mechanism for the trigger so it can be moved. It holds in place with springs. Thats also the reason i didnt wanted to glue it together and put screw holes in it. I used a thread cutter for the holes so the screws dont need a seperate thread and can hold inside the PLA itself. ### Parts If you also want to screw it together without modifying it, you need the following screws: In Germany they are called **M4x10mm** - 1x (3.5mm in diameter, 10mm shaft and 7mm head diameter) **M4x16mm** - 3x (3.5mm in diameter, 16mm shaft and 7mm head diameter) For the trigger to be hold in place you need two pressure springs: **5mm x 20mm** - 2x (5mm thick and 2cm long) ### Blender Files I put the blend files here aswell but in it the model is 1000x smaller than it should be. I didnt want to resize it because it broke some boolean operations while i tested it. ### Questions? If you have questions you can write me here or preferable over on reddit > [3D Print of ArcLight Pistol Executive with working trigger on a K&W stand](https://www.reddit.com/r/starcitizen/comments/193xbk9/3d_print_of_arclight_pistol_executive_with/) > by [u/mjTekk](https://www.reddit.com/user/mjTekk/) in [starcitizen](https://www.reddit.com/r/starcitizen/)
Statistics
Likes
0
Downloads
0