Darksoft's Taito F3 Multi Cart Top Shell
Description
This is a 2 part top shell model for Darksoft's Taito F3 Multi Cart. Normally you are expected to harvest a shell from another F3 game, or just use the Multi Cart as a bare PCB. I didn't want to sacrifice another cart, and I wasn't comfortable using just the bare PCB so I took some dimensions and designed a replacement shell. This shell is split into 2 models that slide together and are secured to one another with 8x 2mm self tapping screws. Each was designed to fit on a Bambu Lab X1/P1 bed. It's longest dimension is 238mm. The only areas that need support are the large overhangs where the locking levers on the F3 motherboard engage. If you want to do a multicolor print for the F3 logo, I placed a small extrusion on the inside of the shell in the shape of the F3 logo. I would advise painting that rear extrusion in the same color as you use for the recessed outline of the F3 logo. That will help the slicer produce a better pattern on the unsupported recessed logo than if you leave it the same as the base color of the print.
Statistics
Likes
0
Downloads
0