Miniature Post Leg Vise
Description
This model was printed at 31.5% of the original to make it roughly the right size to go with a 4x Minifig. I changed the sizes of a few parts to help with fitment. The screw will now freely turn. The pin was made long and will need to be riveted on. I heated my printer up as for extrusion or filament change and used the heated nozzle to accomplish the rivet. I used 100% infill as I do with many miniature models. That is especially useful since this is a fully functional model and is less likely to break. I also used a spring from harbor freight (https://www.harborfreight.com/200-piece-assorted-spring-set-67562.html) to assist in opening the jaw while the handle is actuated.
Statistics
Likes
0
Downloads
0