Air Assist Nozzle adapter for ULS Laser
Description
I was gifted an old 2009 ULS 25 watt RF Co2 laser system. I decided to completely retrofit it with a glass tube and updated controllers, power supplies, air assist, etc. I had to 3d print a number of things to make it work. This is one of them. The mount requires 2 screws to hold the adapter. The nozzle is a cheap k40 one from amazon. You just use the bottom part. An oring around the adapter makes it airtight. https://www.amazon.com/HUNST-K40-Laser-Head-Assist/dp/B0BTVLBVJJ/ref=sr_1_30?crid=R1VMHV0A6097&keywords=k40+nozzle&qid=1705102943&sprefix=k40+nozzle%2Caps%2C155&sr=8-30 The chain mount is just for that. If you need to mount a chain for the air assist tube. There are screw holes on the inside of the x gantry for mounting the rail supports and the brass tubing. Chain and mounting hardware for x rail is not included. Your mileage may vary, no warranty express or implied. See dealership for details.
Statistics
Likes
0
Downloads
0