Old School Runescape Rune Armor Set Statue
Description
Remix of https://www.thingiverse.com/thing:4874977 Rune Armor is a direct rip from the game. Base and crest is theirs. I'm new to printing. Wanted to print the og for friends. Ran into some problems with the model. Re ripped the rune armor model from old school runescape itself. Kept the base and crest from the og. Learned how to use blender. Plugged any holes. Fixed geometry. Cleared any useless stuff. Cape had to be completely handmade. Shield was thin. So I heavily modified it. Crest had missing faces. was overcomplicated so I simplified the model by hand. Cut the model into printable pieces. I added pin and holes on the arms and hair for better piece cohesion. Cape neck needs to be cut and glued in place diy. Pin and holes might not print right under 59% scale depending on your printer or settings. (scimitar hand gave me trouble at 59%) Recommended print size 75% and up Took 23 hours of print time at 100% scale with slicer settings used below. Cura Slicer Settings: https://thangs.com/designer/CHEP/3d-model/Ver3.5%20Cura%20V5.0%20Filament%20Friday%20Good%20%280.20%29%20Profile-988360
Statistics
Likes
0
Downloads
0