SkyTraxx 3.0 Case for Hang Glider
Description
I made a case for a SkyTraxx 3.0 The mounting hole is made for the tripod extensions from the picture and the holes for the holes for the threads are made for these M5x15mm furniture threaded inserts from the picture. I uses a grub screw (M5x15mm) to clamp the tripod extension in place but you can also use a regular screw I would recommend it to print the case from PETG, with 15%-20% infill https://www.amazon.de/Homeet-Gewindeschraube-Stativgewinde-Einbeinstativ-Schnellwechselplatte/dp/B09Q366K7F/ref=pd_sbs_d_sccl_4_2/258-7186302-8785101?th=1 https://www.amazon.de/Gaomoeny-Gewindeeinsatz-Einschraubmutter-Einschraubmuffen-Gewindeh%C3%BClsen/dp/B09T3QCB4L/ref=sr_1_4
Statistics
Likes
0
Downloads
0