Geeetech I3 pro 8mm Acrylic X, Y pully guide
Description
***** Please See Below Update ***** When The X, Y Pulley Are Not Centered Correctly, The Belt Slowly Moves To One Side Till It Gets Stuck And Then Your Lose Your Print. ***** Update: I Have Found The Ball Bearing That Fits The Printer Belt. Http://Www.Banggood.Com/Gt2-Synchronous-Wheel-3Mm-Without-Teeth-For-3D-Printer-Accessories-P-1013245.Html?P=9R09143243493201512Z You Will Need 2 Screws From Bag #27 ( M3X20Mm ), And 2 Hex Lock Nut From Bag #13 ( Hex Socket Nuts M3 ). There Is Not Enough In The Printer Bag, So You Can Also Get Them At: Http://Www.Banggood.Com/10Pcs-Carbon-Steel-Self-Locking-Hex-Nut-Nylon-Insert-Lock-Nut-M2M2_5M3M4M5M6M8-P-1007119.Html?P=9R09143243493201512Z Chose M3. It Works Great. *****
Statistics
Likes
23
Downloads
0