Printrbot Extruder Swivelling Fan
Description
I Moved Replaced My Extruder Motor Cooling Fan With A Larger One (Http://Www.Thingiverse.Com/Thing:941263) But Since I Had Painstaking Soldered It To The Hot End Fan Before (And Dreaded Busting That Now), I Decided To Cool The Face Of The Extruder Too. But I Didn'T Want The Fan Blocking Access To The Extruder, So... A Swivel Was Added. Everything Prints In 2 Flat Parts Without Support, Secures To The Top Of The Angled Plate (Below The Hot End Fan) With The Fan Screws And Requires 1 Additional M3*12Mm Screw (10Mm Would Do) To Hold The Swivel In Place. Fan Swivels Freely And Is Limited In Two End Positions.
Statistics
Likes
3
Downloads
0