PrintDry Filament Spool Extender
Description
I cannot fit MakerBot filament reels (1kg size) in the normal orientation in the PrintDry Pro 3 dryers as the diameter is too big. However, they do fit at a 90 degree turn and can fit two side-by-side (pictures show the orientation and setup). You will need to add at least one layer (a total of 3 layers on top of the base) to raise the height of the filament spool so they do not contact the bottom of the dryer. I have 4 layers in the pictures above but that is for my own setup. Print settings: Printed on Bambu Labs X1 Carbon on 0.24mm Draft settings (normal supports on) in ABS regular draft settings snapped from the weight of the 2x1kg reels. Adding an extra wall and 50% infill works like a charm without having to run 100% infill.
Statistics
Likes
0
Downloads
0